Fortinet FortiCam SD20B, Руководство по монтажу

Страница: 13 / 15

13
Pole Mount
The dome camera can be mounted on a pole using the provided pole mounting kit. It is
designed to work with the pendent mount available separately.
Pole direct mounting
Follow the steps below to mount the dome camera to the pole direct mounting plate.
Tools needed:

Stainless strap cutter

Screw driver
To mount the dome camera to a pole
1. Fasten the direct mounting plate to a pole with the equipped stainless straps.
2. Run the cable(s) through the hole on the direct mounting plate.
3. Fasten the standard pendent mount to the pole direct mounting plate with the supplied
screws and washers.
4. Thread the cable(s) through the pendent mount with the cable(s) coming out of the
pendent mount’s outlet.
Note: Block the cable entry hole with the supplied sponge to prevent outside material
from entering the pendent mount.
5. Attach the waterproof rubber to the pendent mount.
6. Thread the cable(s) through the mounting kit and install the mounting kit to the
pendent mount with the supplied screws and washers. Adjust the waterproof rubber
to the joint.
7. Connect the cable(s) to the dome camera.
8. Install the dome camera to the mounting kit with the supplied screws and washers.