Fortinet FortiCam PD50, Быстрый старт

Страница: 4 / 13

Page 6 Page 7
Camera Connection
Caution: This device complies with IEEE 802.3af PoE specification. Do
not use any PoE injectors that are not IEEE 802.3af compliant as they may
damage your device.
To connect the camera
1. Connect the camera to the FortiRecorder NVR via a PoE switch. The
camera gets its IP address from the DHCP server automatically.
2. Go to the FortiRecorder web UI to configure the discovered
camera. For details, see the FortiRecorder Administration Guide on
h ttp://docs.fortinet.com .
To reset the camera to factory default
1. Remove the cover of the Reset button on the pigtail cable.
2. Press and hold the Reset button for 10 seconds and then release the
button.
Note: The default IP address of the camera is 192.168.1.245.