Fortinet FortiAP 28C, Быстрый старт, Страница: 4 / 14

Mounting Your FortiAP Unit
Using the provided hardware, the FortiAP unit can be attached to a ceiling
or wall.
To attach the unit to a wall or ceiling:
1.
Select an appropriate location and, using the mounting template included
in this guide, mark the location on the wall or ceiling where the anchors
will be located.
2. Screw the provided anchors into the wall or ceiling in the marked locations.
If necessary, drill holes into the wall or ceiling with an appropriately sized
drill bit prior to inserting the anchors.
3. Screw the provided P3.5x32 screws into the two anchors, leaving
enough of the screws exposed to ensure that the unit can be mounted
on them.
4. Mount the FortiAP unit onto the screws and ensure that it is mounted
securily.
5. Use the Kensington security slot to attach a cable lock (cable lock is not
included) to protect your FortiAP device from unauthorized removal.
You can now proceed with connecting your FortiAP unit.
P3.5x32 Screw
Anchor
Page 2
To attach the unit to a ceiling using the provided T-rail connectors:
1.
Attach the T-rail connectors to the bottom cover of the FortiAP unit using
the provided P2.6x10 screws.
Two sizes of T-rail connectors are included in the mounting hardware kit:
15/16in (2.38cm) and 9/16in (1.43cm).
If extra space is required to accommodate drop ceiling tiles, use the
provided spacers and P2.6x25 screws.
2.
Line up the connected T-rail connectors with an appropriately sized rail
and press the unit onto the rail until it snaps into place.
3.
Use the Kensington security slot to attach a cable lock (cable lock is not
included) to protect your FortiAP device.
You can now proceed with connecting your FortiAP unit.
P2.6x10 Screw
Clip
P2.6x25 Screw
Spacer
Clip
Clip
T-rail
Page 3