Fortin 12084A-DL1004, Руководство пользователя

Страница: 10 / 23

CHOICE 2 -
This method must be programmed by the installer during installation. This method
will activate the remote car starter sequence:
ACTIVATION :
STEP 1 The vehicle must be running.
STEP 2
Make sure that all doors are closed and the transmission is in the
NEUTRAL position.
STEP 3 Press the brake pedal.
STEP 4 Engage the parking brake.
STEP 5 Release the brake pedal.
STEP 6
Press the START button for 3 seconds.
The parking lights will flash once and then remain on.
STEP 7
Remove the key from the ignition barrel : the vehicle will remain
running with the Remote-Starter.
STEP 8 Exit the vehicle and close all of the doors.
STEP 9
Press the LOCK button to lock the doors. The remote Green
Led flash and bip once to confirm. The Remote-Starter will stop
running
STEP 10 The vehicle is now ready to be remote started.
If the parking brake is disengaged, the hood is opened, or any of the doors are opened, Ready
Mode will deactivate to cancel. Start over the sequence from step 1.
Page 10 / 23