Control Layout
Bypass Test Preset
Freeze
Input
Ref
Setup
ALIAS001
Two
Three
Four
Five
Six
[Input] LED illuminates on loss of currently selected video input.
Press [Bypass] to toggle bypass mode (if allowed). Bypass LED will illuminate when
currently selected video card is in Bypass.
Press [Test] to toggle Test Out mode. Test LED will illuminate when the currently
selected video card is in Test.
Press [Preset] to snap the values in the current menu to their user default values, if
supported by software (i.e.: video gain, black level, chroma level, NTSC hue).
Press [Setup] to enter the Panel Setup menu OR press [Setup] and HOLD for >5 seconds
to hardware reset the panel.
Press [Freeze] to freeze the current video out.
Freeze LED will illuminate when the currently selected video card is in Freeze. There is
also a control in the menu tree for the freeze type (Frame, Field-1, Field-2)
[Ref] LED illuminates on loss of currently selected Genlock Reference.
Display shows up to six lines of text in each menu. The top line is the ALIAS Name of
the currently selected card, i.e. ALIAS001 or SAT27. Many menus contain more than six
lines and may be scrolled up or down by rotating the [SEL] knob.
RCP-502 User Manual
Page 4
