FORTEC STAR Mercury II Digital F
Pic 3
Once you have the highest "Signal Level" and Signal Quality", press the
Yellow button
or the "
P. SCAN
" button on the remote to perform a power scan on the satellite for all
available FTA channels. A new screen will show the scan progress (Pic 4).
Pic 4
When the scan is completed, the receiver will save the data.
Congratulations, you just loaded your receiver!
While the installation is not difficult, it does require that you have some experience in electrical
wiring and minor construction techniques. Also, you may have to climb a ladder, so you'll want
to be comfortable working with heights. Most of our customers have successfully installed the
satellite system by themselves.
Installation of the system is entirely your responsibility
. Guidelines and tips provided on
this website are intended to help you achieve a successful installation of your new satellite
system. You are advised to consult a professional installer if you need more support.
Professional Installation is recommended if you have difficulty locating and locking on your
favorite satellite. After you have purchased the satellite system, you may contact a
professional to install the system for you. There is a fee for installation. You can also look in the
local yellow pages under "satellites" for local installers in your area.
SADOUN SATELLITE SALES *
http://www.sadoun.com
* 888-519-9595
Page 3
