2.2 Satellite List
1. Press
PR+, PR-
keys to select the satellite up or
down. Press
OK
key to select and mark, and you
can press
OK
key again to cancel the selection and
the mark.
2. If there is no satellite, the red colour and blue
colour keys will be invalid.
3. Press
red
colour key to pop up the
Edit Satellite
window. Press
PR+, PR-
keys to move cursor up or
down.
Name:
User numeric keys to change the name of
the satellite, please refer to the
Edit Channel
Name.
Longitude: Y
ou can press keys to switch between east longitude and west
longitude. After pressing
OK
key, you can use numeric keys to edit the longitude,
press
EXIT
key or the
PR+, PR-
keys to exit editing mode. The range of the
longitude is from 1to 180 degree. If beyond this range, system will inform you "out of
range" when you press
yellow
colour key on the RCU.
After setting, press
yellow
colour key to save and exit, while press blue colour key
to exit without saving.
4. Press
green
colour key to pop up the
Add
Satellite
window. Since the same operation as the
above
Edit Satellite
window, here we don't explain
any more.
5. Press
blue
colour key to pop up the dialogue
"Are you sure to delete?". Select Yes button and
press
OK
key to delete the selected satellite. You
can cancel this operation by pressing
OK
key at the
NO button.
