Mounting monitors BLO 24“/ 31.5“/ 42“
12
6. Hang the monitor in the wall mount and fold out the support
Hang the monitor from above into the wall mount. Then fold out the support on the wall mount and hook it into the montior. Now
all cables can be connected. After connecting the cables, fold the support back onto the wall and carefully fold the monitor onto the
wall. Then it lies flat.
For an application in which the connections (power socket/ LAN-socket) etc. is not behind the monitor, but separate from it:
Before the device is hung up in the wall mount - before step 6 - the corresponding cables must be threaded into the opening of the
cable entry.
for seperate connections
Landscape
Portrait
7. Reattach the locking screws
After the correct installation, the monitor hangs plane on the wall. Only when this is the case can the locking screws be screwed into
the monitor.
