Control panel
Operation
Default
is
Fahrenheit
when
power
is
on
.
Press
"
MODE
"
button
5
seconds
,
to
switch
between
and
.
Other
buttons
use
the
same
method
to
switch
between
two
modes
.
Set temperature range: Fahrenheit degree mode
1
.
Fridge
temperature
range
:
32
~
43
(
Default
value
38
)
2
.
Freezer
temperature
range
: -
10
~
5
(
Default
value
-
2
)
°C
°F
°F
°F
°F
°F
- 13 -
CHILD LOCK
The
CONTROL
PANEL
LOCK is
designed
to
prevent
any
changes
to
the
settings
to
the
refrigerator
.
To
enable
the
CHILD
LOCK, press
the
LOCK button, the
CHILD
LOCK
icon
will
turn
on
.
The control panel will be locked until unlocked at the control panel or
there is a loss of power.
To
disable
the
CHILD
LOCK, press
and
hold
the
lock
button
for
approximately
3
seconds
until
the
LOCK icon
turns
off
and
the
control
panel
is
working
in
normal
operation
mode
.
Setting the Temperature Control
• Your unit has one control for regulating the temperature. The temperature control is located
on the outside of the refrigerator compartment door.
• The first time you turn the unit on, the unit will start at the factory-set default temperature,
which is 38ºF in the refrigerator compartment and -02ºF in the freezer compartment.
• The first time you turn the unit on, adjust the temperature in the refrigerator compartment to
34ºF
and run for at least 4 hours before placing food inside. This will ensure that the freezer
compartment is thoroughly chilled and the refrigerator compartment is stabilized before food is
placed inside. Then adjust the temperature setting to your desired setting.
• To adjust the temperature in each zone, press the appropriate zone button, and the selected
zone will flash on and off. The temperature will change according to the pre-set temperatures
as shown below. You will hear a bell chime with each press of the control panel buttons.
