Fort F41, Руководство пользователя, Страница: 6 / 12

OIL LEVEL IN THE REDUCER
Lack of oil in the reducer will cause to much wearing and overheating. Heat is transmitted to the
engine case and that could cause damage of reducer and also the engine.
Make the following control, according to the picture 2:
-
Flange should be in the horizontal position when you set the tiller. (lean the tillers forwards)
- Loosen the screw pos.13 (picture 2)
- Check if the oil level is up to screw hole
- If the oil level is low, refill the oil up to lower level of the screw hole
- Put back the screw pos. 13
PICTURE 2
LUBRICATION
For transmission lubrication, use the oil according to the table below. ( picture 3 ).
PICTURE 3
06