Pairing the Thermostat and Receiver
Page: 9
The LED will
stay
illuminated
yellow
1
Press “ ” to turn off the receiver,
when in the OFF condition, press and
hold the “ ” button for at least 3
seconds, the LED will now illuminate
yellow constantly.
2
On the Thermostat
when in “Standby”
mode, press and
hold “ ” for 3s.
4
On the Thermostat:
Press the “ ” to enter pairing
mode, it will display “ ”, and the
icon “ ” will be flashing.
5
If pairing is successful, the Thermostat
will display “ ”, and the “ ” icon
will now constantly display, and then
will automatically go back into the OFF
interface.
3
The Thermostat will then show “ ”.
As default, the Thermostat & Receiver are pre-paired
