3/4(19mm)
A
B
9-1/16(230mm)
OPENING
To120°
120°-180°
DIM.A
10-3/4(273mm)
8-3/4(222.2mm)
DIM.B
7-13/16(198.4mm)
5-5/8(142.9mm)
DIM.A
7-3/4(197mm)
5-3/4(146mm)
DIM.B
6-1/8(156mm)
4-1/8(105mm)
PARALLEL ARM (PUSH SIDE) Mounting
3 (76mm)
Size 2&3
5/16(8mm)
7/16(11mm)
3/8(9.5mm)
3/8(9.5mm)
2(50.8mm)
2-3/4(69.8mm)
3/4(19mm)
A
B
8-3/16(208mm)
3-3/8(85.7mm)
5/16(8mm)
7/16(11mm)
3/8(9.5mm)
3/8(9.5mm)
2(50.8mm)
2-3/4(69.8mm)
Size 4&5
Size 4&5
Size 4,5
Size 2,3
Size 2&3
1. Select door opening angle and use dimensions shown above .
Mark four (4) holes on door for door closer and four(4) holes underside of frame for paralle l bracket.
2. Drill pilot holes in door leaf and frame for #14 all-purpose screws for wood door/frame.
Or drill and tap for 1/4-20 machine screws for metal door/frame.
3. Mount closer on door using provided screws.
SPEED ADJUSTING VALVE MUST BE POSITIONED AWAY FROM HINGE EDGE
4. Install parallel Arm Bracket to frame using provided screws.
5. Using a wrench on the square shaft at bottom of closer, rotate shaft approximately 45 degrees toward hinge edge of door.
Hold and place main arm on top shaft of closer at proper index mark as illustrated.
FOR LEFT HAND DOOR "L"(illustration " A"). FOR RIGHT HAND DOOR "R"(illustration "B").
Tighten arm screw with Lock-washer securely.
6. Remove arm shoe from forearm and discard. Install rod end of forearm to bracket using provided screw/washer assembly.
7. Adjust length of adjustable forearm so that main arm is parallel to frame.
8. Adjust the door closer, following instuctions as shown on page 1.
INSTALLATION SEQUENCE
(A)
(B)
Parallel arm Installation
Speed screws
Right hand door
Left hand door
S
R
L
S
L
R
45°
45°
Left hand door shown
Right hand door opposite
Dimensions are in inches (mm)
Do not scale drawing
Hinge
or
Pivot
PAGE 4
