FORST XR8P, Руководство пользователя

Страница: 9 / 59

P a g e | 8
8. All personnel operating or feeding material into the machine must wear heavy
duty non-snag clothing to help prevent being caught on material and drawn
into the machine. The feed mechanism of this machine uses high powered
hydraulic motors to drive sharp toothed rollers that feed material into the
cutting blades.
DO NOT take risks with it. NEVER ASSIST ANY MATERIAL
INTO THE FEED ROLLERS WITH HANDS OR FEET . Use a push stick or a
further long piece of material if necessary.
9. Never climb onto the hopper area while the machine is in operation.
10.
Caution!
– Keep hands and feet outside hopper. Do not attempt to force
material into the machine by hand
– use a piece of wood if necessary.
11. Material can be forcibly ejected from the hopper towards the operator. Ensure
full head and face protection is worn.
12. Very twisted material should be trimmed into manageable pieces. Failure to
do this can result in material extending outside the hopper, moving
aggressively side-to-side creating a hazard to the operator.
13. Do not try to force material over 203mm in diameter or 254mm wide into the
machine.
14. Carefully site the machine so operators can work furthest from any local
danger. For example, on a road side, place machine so operators work on
the verge and not in the road exposed to traffic.
Machine lifting
Th
e lifting eye is designed for securely holding the machine’s weight only. Do not
use hoist hook directly on the lifting eye. Use a correctly rated safety shackle.
Inspect lifting eye before each use and do not use if damaged.
Figure 3