FORS ASW 812-2, Руководство пользователя

Страница: 21 / 72

If the ProSense phase is
already carried out and the
water filling is already started,
the new programme starts
without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste.
Opening the door
If the temperature and level of
the water in the drum are too
high and/or the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the button Start/Pause.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If necessary,
add or remove the items.
3. Close the door and touch the button
Start/Pause.
The programme or the delay start
continues.
End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase indicators
become steady and the time area shows
.
The indicator of the Start/Pause button
goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off button to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn the
programme dial to set a new
cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
Draining water out after end of
cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
• The display shows the door locked
indicator
• The drum still turns at regular intervals
to prevent the creases in the laundry.
• The door stays locked.
• You must drain the water to open the
door:
1. If necessary, touch the Spin button to
decrease the spin speed proposed by
the appliance.
2. Press Start/Pause to continue the
cycle
3. When the programme is completed
and the door locked indicator goes
off, you can open the door.
4. Press the On/Off button a few seconds
to deactivate the appliance.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
Stand-by option
The Stand-by function automatically
deactivates the appliance to decrease the
energy consumption when:
21