FeedbackNow-Forrester
Date: 10/30/2019
Page 7 / 11
FeedbackNow-Forrester
22b rue du lac
1020 Renens- Switzerland
Environmental recommendations
All superfluous packaging materials have been eliminated. We have done everything possible to make it easy to
separate the packaging into three types of materials: cardboard (box), expanded polystyrene (filler material) and
polyethylene (packets, foam protective sheets). Your device is composed of materials that can be recycled and
reused if it is dismantled by a specialist company. Please observe local regulations concerning the manner in
which waste packaging material, used batteries and your obsolete equipment are disposed of.
Warnings
Valid for the product Smiley Box v2 8354A, 8354B
R
ead the instructions in the manual
The safety of this product is only guaranteed when it is used in accordance
with its purpose. Maintenance should only be carried out by qualified
persons.
Please note, do not install the equipment close to a heat source or in damp conditions.
Risk of explosion if the battery is removed with an incorrect type. Contact FeedbackNow for more information if needed.
Please note: When the equipment is open, do not carry out any operations other than the ones set out in this document.
Please note: for you own safety, you must ensure that equipment is switched off before carrying out any work on
it.
Recommendations regarding use
•
Before using the system, check that the power supply voltage shown in the user manual corresponds to
your supply. If it doesn’t, please consult your supplier.
•
Place the device against a flat, firm and stable surface.
•
The device must be installed in a location that is sufficiently ventilated so that there is no risk of internal
heating and it must not be covered with objects such as newspapers, cloths, curtains, etc.
•
The device’s aerial must be free and at least 10 cm away from any conducting material.
•
The device must never be exposed to heat sources such as heating equipment.
•
Do not place the device close to objects with naked flames such as lit candles, blowtorches, etc.
•
The device must not be exposed to aggressive chemical agents or solvents likely to damage the plastic or corrode the
metal parts.
Warning: Do not open the product, risk of electric shock
