16
FØRO PH13000 - MANUAL
EN
Step 3: Assemble control box assy (K).
Fix the control box assy (K) to the bottom of
the middle plate (J) with 4 screws (3/16” - DD).
Make sure the turning knob is facing the same
way as the magnets on one of the sides of the
middle plate. Otherwise you won’t be able to
regulate the gas supply while the heater is
working.
Additional note:
Unscrew the red ignition
button and insert an AAA battery in the hole.
Step 4: Install the 4 upper support legs (D) by
sliding them in between the extension part of
the lower support legs (L) and the middle plate
(J). Use 2 screws (3/16” - DD) to secure each
upper support leg (D).
