Your FORNO Fan comes with a unique Voice Command Centre (VCC) that
allows you to take full control of your fan with only
your voice.
To install this device you will need to follow the following steps:
• Turn OFF the wall switch that provides power to the box where the fan has been installed.
• Select a wall electricity receptacle that is in the room where the fan is within 16ft (5m) of the fan.
• Using an USB plug (not supplied), plug in your VCC to the USB plug and plug both to the selected receptacle. For best results do not
place your VCC behind large furniture nor appliances.
• Follow the voice instructions that the VCC will give you to set up the room that your fan is in.
• If a room has not been selected within 1 minute of the second time the VCC prompts you to select a room,
the system will default to “FORNO Home” as the room for this fan.
• After that is set, you will need to short press the button at the bottom of the VCC and then
long press for 3 seconds to pair the fan and the VCC. Follow the instructions that the VCC will
give you that include turning on the wall switch that provides electricity to your fan.
• The voice instructions and actions are also described below.
• Once the pairing is done you will be able to control your fan by using your voice.
• Please go to the next page for a full list of the voice commands available.
The list is also available if you install the Forno APP.
Installing the Voice Command Centre (VCC)
12
VCC Voice Instructions and Actions
Please make sure that the wall switch where your fan has been installed is Off before you begin.
When you plug in your VCC for the first time it will say:
“Welcome to FORNO VOCE. Depending on the room you are placing me, please say now either FORNO Home, FORNO Dining or
FORNO Bedroom.”
Action:
You need to say out loud: “FORNO Home”, “FORNO Dining” or “FORNO Bedroom” according to the name that fits better
the location of your fan. You can only choose and say ONE location.
When the VCC recognizes your voice it will say:
“Welcome to FORNO VOCE World to wake me up you can call Forno Home”. If FORNO Home is the room you selected.
“FORNO Home” will be the wake-up call for this VCC from now on.
It will say “Welcome to FORNO VOCE World to wake me up you can call Forno Dining”. If FORNO Dining is the room you selected.
“FORNO Dining” will be the wake-up call for this VCC from now on.
It will say “Welcome to FORNO VOCE World to wake me up you can call Forno Bedroom”. If FORNO Bedroom is the room you
selected. “FORNO Bedroom” will be the wake-up call for this VCC from now on.
This will be the ONLY wake up call for that VCC from now on. You always need to use this call to put your VCC in alert mode so it
can take further commands.
If a room has not been selected within 1 minute of the second time the VCC prompts you to select a room, the system will default to
“FORNO Home” as the room for this fan.
To pair your fan to the VCC do a short press (just a pulse) followed by a long press (3 seconds) of the button at the lower part of the
VCC and it will say:
“If you are pairing a fan, switch on the power to the fan now”.
Action:
Switch on the wall switch that provides power to the fan.
The fan will open a pairing window of 30 seconds. The fan will beep when the pairing is done.
You are ready to give voice instructions to your fan!
Note: You can turn the LED light on or off by short pressing the button at the bottom of the VCC.
Button
USB Plug
Not Supplied
