11
Congratulations!
You have completed successfully the functional test of
your fan. Now go to the section for setting up your Voice
Command Centre (VCC).
• Check that the fan is correctly positioned: the blades at least
7ft. (2.1m) off the floor and the tip of the blades at least 30in
(0.76m) from any object.
• Check that the supports, bracket, fan blades and light are
securely attached.
• Clean the blades and body of the fan using a soft, lint free cloth
or a soft brush. DO NOT use water as it may damage the
internal parts.
• Turn on your circuit breaker switches or replace the fuses in
your fuse box.
• Turn on the wall switch that provides power to the box where
the fan has been installed.
• Place 2AAA batteries (not included) in your remote control
following the polarity indicated in the battery compartment of
your remote control.
• Press #1 in your remote control. The fan should start in low
speed and you should feel a gentle breeze going from ceiling
to floor. If the fan wobbles, stop the fan and go to the trouble
shoot section.
• Press #3 in your remote control. The fan should move on to a
medium speed and you should feel a breeze going from ceiling
to floor. If the fan wobbles, stop the fan and go to the trouble
shoot section.
• Press #6 in your remote control. The fan should move on to a
high speed and you should feel a strong breeze going from
ceiling to floor. If the fan wobbles, stop the fan and go to the
trouble shoot section.
• Press the Light Icon, light should switch on.
• Press the sign to the right of the light icon,
the light should go brighter.
• Press the sign to the left of the light icon,
the light should go dimmer.
• Press the On/Off button at the top of your
remote control. The fan and the light should
turn Off.
Getting to Know Your Remote Control
Checking Your Installation
ON/OFF Switch:
If fan is OFF and lights are OFF, it turns fan ON in
speed 3, light at medium. If pressed again, it
turns everything OFF
* Fan Speed Buttons:
If pressed while fan is OFF, it turns fan ON at
this speed. If pressed when fan is ON it takes
the fan to that speed.
ECO Mode:
Sets fan in reverse mode for
winter energy savings
Breeze Mode:
Sets fan in a gentle, sequential
speed change for a soothing
cooling effect
Very High Speed*
High Speed*
Medium High Speed*
Very Low Speed*
Low Speed*
Medium Low Speed*
Switches ONLY the fan OFF
Wind Mode:
Sets fan in a vigorous, random
speed change for a brisk
cooling effect
Makes Light Brighter
6 Hour Countdown Timer
Dims Light
Turns Light ON at very low or OFF
3 Hour Countdown Timer
You are ready to use
your Remote Control!
