6
CAUTION – Risk of fire or explosion
due to puncture of refrigerant tubing; Follow handling
instructions carefully. Flammable refrigerant used.
DANGER - Risk of child entrapment
. Before you throw away your old refrigerator or freezer:
Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
WARNING!
To reduce the risk of burns, electrocution, fire or injury to persons:
1. This appliance is equipped with the environmental-friendly refrigerant R600a.
The refrigerant
R600a is inflammable
. The components of the cooling circuit must neither be damaged during
transport nor use.
2. If any part of the cooling circuit is damaged,
the appliance must not stand
near a fire, naked
light or spark-generating devices.
Contact the customer service or the shop you purchased the appliance immediately.
3.
If gas is set free at the installation site:
a) Open all windows.
b)
Do not
unplug the appliance and
do not
use the control panel or thermostat.
c)
Do not
touch the appliance until all the gas has gone.
d) Otherwise sparks can be generated which will ignite the gas.
4. Keep all components of the appliance away from fire and other sources of ignition when you
dispose of or decommission the appliance.
5. Do not install the appliance near of volatile or combustible materials (e.g. gas, fuel, alcohol,
paints) and in rooms which may have poor air circulation (e.g. garage).
6.
EXPLOSION HAZARD!
Do not store any explosive materials or sprays, which contain flammable
propellants, in your appliance. Explosive mixtures can explode there.
7. While unpacking, the packaging materials (polythene bags, polystyrene pieces, etc.) should be
kept away from children and pets.
CHOKING HAZARD! RISK OF INJURY
!
8. Always observe the required minimum distances for proper ventilation.
9. Do not connect the appliance to the electric supply unless all packaging and transit protectors
have been removed.
10. Operate the appliance with 115V/60Hz/AC only. All connections and energy-leading
components must be replaced by an authorized professional. Do not use a socket board or a
multi socket when connecting the appliance to the mains.
11. A dedicated and properly grounded socket meeting the data of the plug is required to
minimize any kind of hazard. The appliance must be grounded properly.
12. Always check that the power cord is not placed under the appliance or damaged by moving
the appliance.
13. The technical data of your energy supplier must meet the data on the model plate of the
appliance.
14. Your domestic circuit must be equipped with an automatic circuit breaker.
15. Do not modify the appliance.
16. Turn off the power before you install the appliance and before you connect it to the mains.
RISK OF FATAL ELECTRIC SHOCK
!
17. Disconnect the appliance from the mains before you clean or maintain it.
RISK OF ELECTRIC
SHOCK
!
18. Remove possible dust accumulation at the power plug, at the safety power socket and at all
plug connectors
regularly
.
RISK OF FIRE
!
19. Keep the cord away from heated surfaces.
20. The power plug must always be accessible after installation.
21. Do not use a socket board or a multi socket when connecting the appliance to the mains.
22. Do not connect the appliance to an energy saving plug (e.g. Sava Plug) and to inverters which
convert direct current (DC) into alternating current (AC), e.g. solar systems, power supply of ships.
