Forno Venetzia PRONTO 500 Скачать руководство пользователя страница 6

Страница: 6 / 6

23. To retract the tool holder, remove all tools, and loosen all 4 plastic head screws. Now lift the

tool holder slightly to take it off the

“hooks”

and gently allow it to slide down in to the storage

position.

24. Slide the chimney pipe into the flue opening on the top of the oven. Ensure it is completely

in place and straight.

25. Slide the chimney cap into the top of the chimney pipe. Ensure it is also completely inserted

into the chimney pipe.

Storing your oven….

Ensure any embers and ash are extinguished completely and empty into the metal

bucket or container as previously instructed. Sweep oven hearth to remove any residual

ash and soot.

Remove oven tools from tool holder and gently lower the tool holder down to the

stored position. Do not let the tool holder drop as this will damage the oven and the

tool holder.

Slightly lift the folding shelf up until the hooks at the top of the hinge can slide off of the

top plastic head screws and gently tilt the front of the folding shelf down to allow it to

rotate downward until resting beside the cart. Do not let the folding shelf drop as this

will damage the oven and the folding shelf.

Carefully remove the chimney cap and then the chimney pipe. Take care as the chimney

cap may have some soot around the edges of the top of the cap.

Carefully store the chimney cap and pipe inside the oven chamber and replace the door.

Ensure the wheel blocks are placed up against the wheels to prevent the oven from

accidentally moving during the off season.

Forno Venetzia

and Pronto

are Registered Trademarks of Forno Venetzia Corporation

Содержание PRONTO 500






