background image

Installation and Operating Manual 

Installation and Operating Manual 

HOBS

23

WARNING!

Never try to make any repairs of this 

hob by yourself. In the event you found 

any defects of the glass ceramic hob, 

disconnect it from power mains. Never 

allow random people, other than quali-

fied service personnel, to repair your 

hob.

MAINTENANCE AND REPAIRS

This appliance does not require any special 

technical maintenance in excess of normal 

cleaning. 

Prior to the shipment from the manufacturer’s 

plant, this appliance has been tested and 

accepted by qualified and experienced quality 

control personnel so as to ensure, that the 

appliance is in proper and good working 

condition.  Any repairs, which may become 

necessary in the future, must be performed 

with the maximum care and diligence.

It is strongly recommended to contact the 

nearest FORNELLI service center or the shop 

where you bought the product.

If your product is still covered by the 

manufacturer’s warranty, then while calling 

service center advise the following information: 

warranty certificate number, defect description, 

model and serial number specified on the 

nameplate attached to the lower part of your 

hob. 

If your hob is not covered by the manufacturer’s 

warranty anymore,   then while calling service 

center notify them the model and describe the 

defect. This will be sufficient.

Содержание PVA 60 CREAZIONE

































Отзывы: