manualshive.com logo in svg

Formula NERO R, Руководство по эксплуатации, Страница: 9 / 17

Поделиться
Скачать
Formula NERO R Скачать руководство пользователя страница 9

9

1.2  Disc brakes

Install disc brakes and torque all fasteners according to manufacturer’s specifica-

tions. Install, route and check that all cables or hydraulic hoses are securely fastened 

to the lower leg and will not move during compression of the fork.

WARNING: Tighten the brake calipers to the brake manufacturer’s torque 

specifications.

1.3 Wheels

Consult the technical specifications provided by the wheel manufacturer to install 

and secure the wheels to the forks. 

1.4 Lubricants

Only use hydraulic oil, lubricant and grease included in the kit sold by FORMULA.

Hydraulic oil Idemitsu OJ01, Formula FX and Grease Formula Fork Seal.

In the cartridge, use hydraulic oil Idemitsu OJ01 only. 

For lubrication of legs and tubes, use Formula FX only.

CAUTION: Do not use lubricants other than those recommended above. Use 

of other lubricants may damage the fork and make it unsafe.

Threadlocker for screws 

Apply a liberal mount (where indicated) of medium strength threadlocker all the way 

around  the thread. After applying, clean any excess threadlocker with a cloth. Let dry 

at least 24 hours before installing.

WARNING: The threadlocker used for assembly is dangerous to skin and 

eyes. Consult and adhere to the warnings on the threadlocker container be-

fore use.

Содержание NERO R


















Отзывы:

Нет отзывов