KNIGHT
TM
BOLLARD
SECURITY CORE INSTALLATION INSTRUCTIONS
page 2 of 2 | Rev. 08-16-16
© 2016 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
T 800.451.0410 | www.forms-surfaces.com
Position bollard over security core
• Inspect security core for moisture. If
moisture is present remove and dry
immediately before installing fixture. Do
not install fixture unless security core is
completely dry.
• Slide bollard over security core so lower
holes in bollard line up with holes in
security core base plate.
STEP BY STEP
FOR ALL KNIGHT SECURITY BOLLARDS
Attach bollard to security core
• Thread 1/4"-20 x 3/4" flat head cap
screw (a) into each lower hole in bollard.
• Use 5/32" hex bit or key to tighten all
screws until snug.
a
a
a
