![background image](http://html1.mh-extra.com/html/formax/fd-8200cc/fd-8200cc_operators-manual_2320065002.webp)
Specifications
Cutting Style:
Cross Cut
Strip Cut
Shred Size:
1/16” x 1/2”
1/8”
Sheet Capacity: 4 to 5
9 to 10
Speed:
16 feet per minute
16 feet per minute
Feed Opening: 8.7”
8.7”
Dimensions:
16” W x 10” D x 20” H
16” W x 10” D x 20” H
Bin Capacity:
6 gal.
6 gal.
Weight:
22 lbs.
22 lbs.
Power supply:
110-120V, 60Hz
110-120V, 60Hz
FD 8200CC
Operation
1. Connect the power cord to an AC outlet.
2. Push the Start/Off/Reverse switch to the
START
position. The power
indicator will light.
3. Insert documents into the paper infeed. The cutters will start
automatically, and stop after the documents are shredded.
4. The FD 8200 shreds 4-5 sheets (Cross-Cut) or 9-10 sheets (Strip-Cut)
at a time, continuously for up to 30 minutes. After that, allow 15 minutes
for the shredder motor to cool down.
FD 8200SC
Parts Identification
1. Start/Off/Reverse Switch
2. Power Indicator Light
3. Basket Full Indicator Light
4. Paper Infeed
5. Optical Sensor
6. Wastebasket
7. Power Cord
8. Door Switch
Features
• Auto Start/Stop detects paper and starts shredding automatically
• Built-in overload sensor stops the motor if shredder overheats
• Reverse mode for releasing jammed paper
• Shreds paper up to 8.7” wide, including documents with staples
• Auto shut-off when wastebasket is full
• Shreds up to 5 pages at a time (FD 8200CC), and up to 9-10 pages
(FD 8200SC).
Overload Protection
To prevent damage of the shredder, the motor has been equipped with a
thermal overload mechanism. This makes the unit inoperative for a short
period of time if it becomes too warm. If this occurs, it is necessary to
unplug the unit for at least one hour before using it again.
Clearing Paper Jams
A paper jam may occur in the following situations: exceeding the
recommended sheet capacity, paper is too wide for the infeed, or if paper
is not fed squarely into the infeed. To protect the unit from damage, it is
equipped with an auto shut-off, in the event of overload.
To clear the jam, follow these instructions:
1. Press the Start/Off/Reverse switch to the
REVERSE
position until the
paper is cleared.
2. Press the Start/Off/Reverse switch to the
OFF
position.
3. To resume normal operation, press the Start/Off/Reverse switch to
START
.
CAUTION:
If the reverse action does not clear the jammed paper, DO NOT
ATTEMPT TO OPEN THE MACHINE HOUSING. Contact your Formax
Dealer for service.