RUNNING
A
JOB
1.
Switch on the
envelope
opener
(
power
switch on the rear
side of
the unit).
2.
Sort out any unsuitable
mail pieces
(e.g. plastic bags and
envelopes
that are thicker than 4 mm, or made from synthetic
materials).
See specifications for further information.
3.
Tap the stack of letters
(address
field toward the front and flap facing
upwards) on a flat surface several
times in order to line up the lower
edges. This ensures that the contents
slip down inside the envelope and are
not damaged when the
envelopes
are
slit
open.
4.
Turn the stack of
envelopes
upside
down
(address field toward the front
but flap facing downwards).
Loosen up the stack just enough so
that the top of each letter rests on
the letter supporting surface. Make
certain
not to tap
the stack again.
5.
Insert the prepared stack of
envelopes
between the transport rollers
and the pressure arm.
