Formax FD 4170, Руководство оператора, Страница: 6 / 25

2
V 9
■
Part Names and Their Functions
● Appearance (front side)
No.
Name
Function
1 Paper feed tray Paper to be burst is set here.
2 Support tray Paper to be burst is set here. Open this tray while operation.
3 Paper feed guide Sets paper to arbitrary position according to paper width.
4 Safety cover
Always close this cover during operation. Machine does not
operate with it open.
5
Paper feed pressure
adjusting lever
Adjusts paper feed pressure according to paper thickness.
Normal setting is “Standard”.
6
Paper feed tray up/down
lever
Moves the paper feed tray up and down.
7
Paper feed rubber roller Feeds papers to the inside of the machine.
8 Power switch
Power is turned on by pressing “I” side of the switch.
Power is turned off by pressing “O” side of the switch.
9 Inlet Insert the provided power cord.
10 Operation panel Refer to “Operation Panel” on page 11.
11 Breaker
Cuts off the power in the meanwhile when excessive load is
given to the machine.
3
11
1
2
4
5
6
7
8
9
10
Number Description Function
1 Paper Feed Tray
2 Support Tray Open this tray prior to operating to support paper.
3 Paper Feed Guides Align and center paper according to width.
4 Safety Cover Must be closed during operation. Burster will not operate with cover open.
5 Paper Feed Pressure
Adjusting Lever
Adjusts paper feed pressure according to paper thickness. Standard set-
ting is “Normal Paper.”
6 Paper Feed Tray
Up/Down Lever
Moves the paper feed tray up and down.
7 Paper Feed Rubber Roller Feeds paper into the bursting area.
8 Power Switch Toggles between ON (I) and OFF (O).
9 Power Cord Inlet Insert power cord here.
10 Control Panel Refer to Control Panel on page 4.
11 Circuit Breaker Shuts down machine in case of overload.
INPUT SIDE