![background image](http://html1.mh-extra.com/html/formax/fd-215s/fd-215s_operators-manual_2319990005.webp)
6. Load paper by sliding through creasing channel under
mechanism cover (Fig. 3).
7. Once the paper is aligned between the side guides, crease by using manual switch (Fig. 4) or foot pedal (Fig. 5).
See Step 2 for explanation of modes.
3
Fig. 6
Fig. 5
Fig. 4
Fig. 3
8. Once the paper is creased, remove it from the creaser
(Fig. 6).
1. Measure sheet to be creased.
2. Move right side guide to correct location and tighten thumbscrew.
3. Load sheet and align with right side guide. Engage creaser with foot pedal or manual control button. Remove sheet.
4. For second crease, move left side guide to correct location and tighten thumbscrew.
5. Load sheet and align with left side guide. Engage creaser with foot pedal or manual control button. Remove sheet.
TWO-PART CREASING (BOOK SPINE CREASING)
* If the creaser will not be used for an extended period of time, turn off the power and unplug for safety.
* After each use, turn off the creaser and clean the surface with a dry cloth.
* To provide smooth operation, periodically apply a couple of drops of lubricating oil to the two mandrils and axle-
tree connecting position.
MAINTENANCE
Содержание FD 215S
Страница 1: ...FD 215S Semi Automatic Paper Creaser OPERATOR MANUAL FIRST EDITION 1 2013...
Страница 2: ......
Страница 6: ......