5.
Push down on the infeed tray lever to lower the infeed
tray (Fig. 6).
Place one form onto the feeder and press the “Start/
Stop” icon to process one test form.
6.
If the fold is skewed, remove forms and turn the skew
adjustment knob under the infeed tray left or right
slightly to make corrections (Fig. 7).
Test another form and make additional corrections as
needed.
7.
Adjust the outfeed catch tray to accommodate the form
size being processed. Slide it in or out until to align the
mark matching the form size (Fig. 8).
8.
When satisfied with the test fold, load a stack of
forms and press the “Start/Stop” icon to begin
processing forms. Press the same icon to stop.
Note: The forms should be neatly stacked and squared
for best results.
7
Fig. 7
Skew adjustment knob
Fig. 6
Fig. 8
Catch tray
Содержание FD 1606 AutoSeal
Страница 1: ...FD 1606 AutoSeal FE 1606 AutoSeal Pressure Sealer FK FL Series OPERATOR MANUAL FIRST EDITION 5 2022...
Страница 2: ......
Страница 4: ......