The
ColorMaxLP2
unwinder is used to unwind the labels on roll
s
with a
” internal diameter.
The
maximum external roll diameter allowed is up to 250 mm (10”) while the maximum label width is
up to 240 mm (9.45”).
An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide,
through the tension arm, the speed and sense of rotation auto adjustment.
INSTALLATION
STEP 1
Using the screws, install the outer disc on the
unwinder core holder.
STEP 2
Attach the printer plate to the unwinder. Do not
fasten the knobs for the moment.
STEP 3
Place the printer on the plate using the guide
rails.
