Forlinx SBC OKMX8MPQ-C Скачать руководство пользователя страница 5

Страница: 5 / 59

Technical Support and Customization

1. Technical Support Range

1.1 Forlinx product related hardware and software source consulting;

1.2 Problems related to our software and hardware manual;

1.3 After-sale technical support for ODM product;

1.4 Forlinx product related trouble shooting, failure diagnose and related maintenance

2. Range of Technical Discussion ( non-compulsory)

2.1 Modification and comprehension of source code;

2.2 How to implant OS;

2.3 Software and hardware problems occured in self-modifying and programming

Note:

the above three points are out of Forlinx technical service range, but Forlinx will try best but

can not promise to help users to solve the problems.

3. Accesses to Technical Support

3.1 If you are able to understand Chinese, you can try to all the technical persons directly, the tel.

number (non-instant messenger) is 0086-312-3119192

3.2 Any Forlinx product related questions or help if you need, you can send email to corresponding

sales engineer whom you keep in touch with, the sales engineer will help you to follow up your

issue and get back to you soonest;

3.3 If you are not able to call the technical person and don’t whom you should send email to, then

you can send email to our public email address

[email protected]

4. Access to Materials

Forlinx product related technical files will be uploaded to dropbox, once users buy product from

Forlinx, the sales engineer will provide users related product technical source download link;

Содержание SBC OKMX8MPQ-C




























































Результаты поиска

Содержание SBC OKMX8MPQ-C

Отзывы:

Бренды по названию

Популярные бренды

Forlinx SBC OKMX8MPQ-C, Руководство пользователя

Результаты поиска

Содержание SBC OKMX8MPQ-C

Отзывы:

Бренды по названию

Популярные бренды