FORK MEASURING COMPANY
Vavdi Sr.No. 17, Plot No 55B, Rani Industrial Estate
Gondal Road, Rajkot-360002
INSTRUCTION MANUAL FOR DIGITAL INDICATOR (302-012)
Tolerance setting “TOL”
a)
Under “ SET-TOL” mode , press button
MODE
to set lower tol.
While “ ” icon is blinking. And the last digit is blinking now, then press button
MODE
to modify
the number from 0-9. Then press button
ZERO/ON/OFF
to blink the left digit , the set the
intended value as above process till finishing all digits.
b)
Press button
SET
again to move to upper tol. Setting, while
“ ”icon is blinking, set the intended value as same procedure as
lower tol. Setting .
Presetting value “CAL”
a)
Under “SET-CAL” mode, press button to set the present
MODE
value. The last digit is blinking and
can be modified from 0 to 9 by pressing button
MODE
.
b)
Press button
ZERO/ON/OFF
to blink the left digit, finish the setting for all other digits per same
procedure.
c)
Press button to
SET
quit. The setting can be applied to both metric and inch mode.
d)
If L –press button
ZERO/ON/OFF
, the preset value goes back to zero and preset mode is quitted.
Changing between metric / inch system “mm-in
”
a)
Under “SET-mm-in” mode , press button
MODE
to change metric/ inch system. “mm” is blinking
on metric system , and “in” is blinking on inch system.
b)
Press button
SET
to quit.
Measuring Direction Setting “dir”
a)
Under “SET-dir” mode , press button
MODE
to change the measuring directly. Sign “
+
” stands for
normal direction . sign “
-
”stands for reverse direction. “ “displayed on reverse direction.
b)
Press button
SET
to quit
