2
Connecting the TV Plate to Support Pillar
Step 2
If you
fi
nd the support column (04) is not in the correct direction, please see
fi
gure
below. Loosen M8x25 screws(T), adjust the support to the correct direction then
tighten screws again.
3 positions
Put 03 (Tempered Glass) on the table. Put Q(Gasket) and T
(M8x25 Bolt) under 03. Turn Y (Plastic Cover) and 04(Support
Pillar) upside down under 03 to install and then tighten screws.
Step 1
Connecting the Support Pillar(04) to Tempered Glass(03)
Place foot pads(V) on the bottom
of the tempered glass base(03)
at the four corners
Support Pillar(04)
Plastic Cover(P)
M8x25 Bolt(T)
Gasket(Q)
Allen Key (W)
1.2
Rubber pad
Tempered Glass
V
03
Q
03
1.3
TV Plate (01）
Allen Key (W)
M6x10 Bolt (R)
Metal Washer (S)
Wire Clip (U)
2.1
2.2
Height
Adjustable
Inserting wire clips(U)
TV Plate can be installed on wall alternatively,
wall mounting hardware not included
