FOREVER iGO PRO JW-200, Руководство пользователя, Страница: 3 / 8

4 5
EN EN
set in the phone.
To activate the smartwatch without connecting it to the charger,
press and hold the touch button located below the display for 3
seconds.
Charging
Connect the device with the charging cable included in the kit. Make
sure that the device and cable connectors are connected to each
other, and then connect the USB cable to a power source.
After the charging process is complete, disconnect the smartwatch
from the charging cable and disconnect the cable from the power
source.
Turning the smartwatch on/off
Turning on: Press and hold the function button until the smar-
twatch turns on.
Turning off: Press and hold the function button until the device
turns off. You can also go to the settings tab in the smartwatch
menu and select the „Disable” option marked with the following
symbol , and then confirm your choice.
„Forever GoFit” application installation
Find application called “Forever GoFit” in Google Play or App
Store and install it.
NOTE: The operating system of the phone must have the follo-
wing minimum specifications to run the application and support
the smartwatch: Android 5.0 or higher / iOS 10.0 or higher
Connect the smartwatch with the phone
1. Activate Bluetooth in your phone.
NOTE: To be able to use all functions of the application and
the smartwatch, during the first launching, allow the application
to access all required functions, and then also activate access
to notifications.
2. Activate “Forever GoFit” in the phone. Start using the application
as a “Guest” by clicking the upper right part of the screen or select
“Register” and follow the steps below:
– enter the email address you want to use to create an account
– press the button (obtain verification)
– a verification code, which must be entered in the indicated field,
will be sent to your email
– enter and remember your user password
3. After logging into the application, you will see the main screen, in which
you should click button or select menu in the upper left corner.
4. Select the smartwatch model you want to connect with by clicking
its picture:
5. Confirm the selected model by clicking “YES”. If a wrong model has
been selected, click “NO” and select the correct one.
6. From the list of devices, select the Bluetooth name of your device
and confirm the connection by selecting „YES”. After a few seconds,
it will connect and all data will be synced automatically. If automatic