P| 6
THE THICK TIMBER TOLEDO WOOD PAVILION
www.ForeverRedwood.com
NOTE:
In order to know where the post needs to be placed, check the numbers on them. If the post is not marked, then place
the single Supports on the ground to locate the markings for each post position and clearly set your bearings. (“Don´t attach yet,
only place them on the ground to begin with”).
Step 1:
Install the high wind anchor bases
(13)
. Please see the “How to anchor your pergola document” for all details. Set your
post
(1)
in the saddle of the anchor bases
(13)
. Drill a ø ¼´´ hole in the post prior to anchoring to facilitate the ratcheting of the
hardware. After that, use a 5/16´´ X 3´´ lag bolts
(A)
to attach each post to the its respective anchor base
(13).
13
1
13
13
1
1
1
13
13
13
1
1
5/16´´ X 3´´ Lag Bolts
