P| 4
SMALL ARCHED PERGOLA KITS
www.ForeverRedwood.com
NOTE:
In order to know where the post needs to be placed, check the numbers on them. If the post is not marked, then place the
single Supports on the ground to locate the markings for each post position and clearly set your bearings. (“Don´t attach yet, only
place them on the ground to begin with”).
Step 1:
Install the anchor base
(10)
with ½´´ X 3 ½´´ anchor bolts (to concrete surface) or lag bolts (to wood surface)
(A)
. Please
see the “How to anchor your pergola document” for all details. Set your post
(1)
in the saddle of the anchor bases. Drill a ø ¼´´
hole in the post prior to anchoring to facilitate the ratcheting of the hardware. After that, use a 5/16´´ X 3´´ lag bolts
(B)
to attach
each post to its respective anchor base.
Step 2:
Attach the single supports
(2)
to the posts with 3/8´´ x 6´´ bolts
(C)
. Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
All options of posts (No posts decorative trim, vertical posts decorative trim and horizontal posts decorative trim)
will be installed in the same way.
1
1
1
1
2
2
5/16´´ X 3´´ Lag Bolts
10
3/8´´ X 6´´ Bolts
