9
Precautions
Before using your new FGI Grow Light, please read this manual thoroughly to ensure that you know how
to operate the features and functions that your new lamp offers safely and efficiently.
This light is not intended for use by persons (including children) with reduced physical, sensory, or
mental capabilities, or those who lack experience and knowledge, unless they have been given
supervision or instruction concerning the use of the lamp by a person responsible for their safety.
If you have any question, contact us at 1-800-630-7345 or find help and information online at
•
Do not install light in a wet location or place where it may come in direct contact with water.
•
Deteriorated insulation on electrical parts may cause an electric shock or fire.
•
Do not place this light in direct heat from room heaters.
•
Do not plug several lights into the same multiple power strip. The light should always be plugged into its
own individual electrical outlet which has a voltage rating that matches the voltage listed on the electrical
rating. This provides the best performance and also prevents overloading of house wiring circuits, which
could cause a fire hazard from overheated wires.
•
Do not use a power cord that has cracks or abrasion damage along its length or at either end.
•
Do not bend the power cord excessively or place heavy objects on it.
•
Do not twist or tie the power cord.
•
Never unplug your light by pulling on the power cord.
•
The light must be safely grounded. Always make sure that you have grounded the light before attempting
to investigate or repair any part of the unit.
•
Power leakages can cause severe electric shock.
•
Never use gas pipes, telephone lines, or other potential lightning attractors as an electrical ground.
•
Improper use of the grounding plug can result in a risk of electric shock.
•
If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding
plug and
•
The marked rating of the extension cord should be AC 115-120 V, 10 A, or more.
•
If a grounding adapter is used, make sure the receptacle box is fully grounded.
•
Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord,
or loose wall socket. This may result in an electric shock or fire.
•
You need to remove all the protective plastic film before you initially plug the product in.
•
Do not spray the light with chemicals. Clean the light with a damp cloth using water only.
•
Before cleaning or performing maintenance, unplug the light from the wall socket, or turn off at the breaker.
•
The diodes in your new Uniformity Pro are conformal coated which is a thin membrane applied over the
diodes and printed circuit boards. This coating should be protected. Do not apply chemical cleaners or
abrasives. Unprotected diodes are more likely to fail. Do not expose the light to volatile organic compounds
(VOCs). Any of which void the warranty.
