Forest SHUTTLE iOn, Установка

Страница: 4 / 8

4 │ Installing the FOREST SHUTTLE ® iOn battery motor v1.1
Shuttle® iOn Battery:
When the battery is getting low, the Shuttle® iOn motor will begin to operate slower, (6 cm/s – 2,36”/s),
this is an indication to re-charge the battery.
Charging the battery:
Take out the battery from the Shuttle® iOn motor and connect the charger to the battery as pictured below:
Charging:
The charger is equipped with an indicator LED on the front side, this LED indicates the actual charging status.

Charging time battery is 5 hours;

Do not use third party battery chargers;

Do not attempt to repair the charger if damaged; replace the charger in this case;

Do not charge the battery in humid conditions;

Replace charger if damaged;

Do not expose the battery pack to direct sunlight while charging;

Do not repair the battery pack if damaged;

Replace the battery pack if damaged;

Do not charge the battery in ambient conditions below 10⁰C (50⁰F);

Dispose properly.
LED Orange: LED Green:
Battery is charging Battery is fully charged
Squeeze to
release