NO
Screws
Panel 1 (Floor)
Size: 2316x1460mm
Panel 2 (Floor)
Size: 2326x856mm
PLACE
IN
LOCATION
3x
50mm
Screws
MUST PRE DRILL
Batten 7 (Back Batten)
Size: 28x28x1829mm
Panel 3 (Right Back)
Size: 2260x1929mm
Step 1
Step 2
INSTRUCTIONS
INFORMATION
This building is pressure treated to ensure longevity of all timber components and to protect against rot. This may leave a colour difference on some parts that will even out as the moisture
content stabilises. This will not need additional treatment.
- This product must be built on a solid level base.
- The roof of this building is not a load bearing structure.
- Please keep all plastic bags and small parts away from children
- Timber is a natural material. It will shrink and swell as a result of varying moisture content.
- Due to the nature of the material the doors may need some trimming for a neater fit.
Technical Help line:
0333 7777 089
8.30 am and 5.00 pm Monday to Friday.
Please check all parts prior to assembly
Assembly
of damaged parts may be deemed to be acceptance and this may affect the remedies you are entitled to.
If the product is not constructed in accordance with the instructions, or is altered in any way (e.g. painted), the manufacturer cannot be held liable for any resulting damage
This article contains biocidal products to give protection against wood destroying insects & wood rotting fungi. Contents may vary.
May contain : Basic copper carbonate (Copper (II) carbonate – Copper (II) hydroxide (1:1), Cupric oxide, Copper hydroxide carbonate, oxyethyl, ammoniumpropionate, Copper HDO,
Propiconazole, Tebuconazole, Boric acid, Benzalkonium chloride.
Wear gloves when handling freshly treated wood. Avoid breathing dust when cutting treated or untreated wood. Dispose of off-cuts responsibly – do not burn.
Panel 1 (Floor)
Size: 2316x1460
Qty: 1
CS88BFL1
Panel 2 (Floor)
Size: 2326x856
Qty: 1
CS88BFL2
Panel 3 (Right Back)
Size: 2260x1929mm
Qty: 1
OPCS88RHP
Panel 4 (Left Back)
Size: 2260x1929mm
Qty: 1
OPCS88LHP
Panel 5 (Window)
Size: 1460x1930mm
Qty: 2
OPCSUM88WP
Panel 6 (Front)
Size: 1170x1930mm
Qty: 1
TPCS77DP
Panel 7 (Roof 1)
Size: 2430x928mm
Qty: 1
243009288TRI
Panel 8 (Roof 2)
Size: 2430x1502mm
Qty: 1
243015028TRI
Fixing Pack: OPCSUM88FP
Batten 6 ( Far Back Cover)
Size: 28x12x1839mm
Qty: 1
28121839PPT
Batten 7 (Back Batten)
Size: 28x28x1829mm
Qty: 1
28281829P
Batten 2 (Roof Support)
Size: 45x28x2260mm
Qty: 2
45282260P
Batten 1 (Roof Joint 3)
Size: 28x28x2370mm
Qty: 1
28282370P
Pozi Drive Screwdriver
Tools needed (Not supplied)
Sharp Knife
Tape Measure
Hammer
Drill
Important : Assembly
of this shed requires a
minimum of two adults.
Batten 10 (Roof Joint 1)
Size: 28x28x1540mm
Qty: 2
28281540P
Batten 9 (Roof Side Cover)
Size: 90x12x1560mm
Qty: 2
90121560PPT
Batten 12 (Roof Front Cover)
Size: 90x12x1265mm
Qty: 1
90121265PPT
Batten 14 (Roof Joint 2)
Size: 28x28x896mm
Qty: 1
28280896P
Batten 11 (Roof Joint 4)
Size: 28x28x1474mm
Qty: 1
28281474P
Batten 13 (Roof Joint 5)
Size: 28x28x1230mm
Qty: 1
28281230P
Flush Hinge
Qty 4
Turn Button
Qty 1
Z’ Bracket
Qty 4
40mm Screw
Qty 20
Felt
Tacks
Qty 80
50mm Screw
Qty 22
20mm Screw
Qty 36
Door Handle
Qty 2
Window 2(Window)
Size: 1633x372mm
Qty: 2
PW163337202
Felt Roll (Felt)
Size: 10.5m
Qty: 1
Door Panel (Right)
Size: 475x1796mm
Qty: 1
SHDR475X1796RHPT
Window (Window)
Size: 1595x518mm
Qty: 2
SUMWIN1595518PTBI
Cracked Bolt
Qty 1
Panel Pins
Qty 24
30mm Screw
Qty 89
Door Panel (Left)
Size: 475x1796mm
Qty: 1
SHDR475X1796LHPT
Batten 4 (Front Cover)
Size: 40x12x1915mm
Qty: 2
40121915PPT
Batten 3 (Angled)
Size: 32x32x1930mm
Qty: 2
32321930SPT
Batten 5 (Back Cover)
Size: 44x16x1915mm
Qty: 2
44161915PT
Batten 8 (Back Batten)
Size: 24x12x1612mm
Qty: 4
24121612P
Batten 15 (Roof Joint 2)
Size: 24x12x375mm
Qty: 4
24120375P
Batten 0 (Roof Side Cover)
Size: 90x12x2398mm
Qty: 2
90121560PPT
Batten 6B ( Far Back Cover)
Size: 40x12x1839mm
Qty: 1
40121839PPT