02/2020 WDOC Diamond Sense
www.forestgroup.com
v1.4
FOREST DIAMOND SENSE REMOTE
–
SET TIME
SWITCHING BETWEEN 15 AND 2 CHANNELS:
Default setting of the Diamond Sense is 15 channels. Channel 1 up to 15 can be used.
When desired, for example when you only have one or two motorized systems, you can change the setting to 2
channels:
Keep both buttons, CH- and CH+ pressed for about 8 sec until
the display shows F-02.
Now the Diamond Sense is a 2-channel remote control.
To change back to a 15-channel remote control:
Keep both buttons, CH- and CH+ pressed for about 8 sec until the display shows F-15. Now the Diamond Sense is a 15-
channel remote control.
SET CURRENT TIME AND DAY
(when necessary, first unlock the buttons: press and hold MODE and TIME):
or
or
MODE must be ‘
MAN
’
press TIME button once, change hours by pressing press TIME button once, change minutes by pressing
hours start blinking
OPEN or CLOSE button
minutes start blinking
OPEN or CLOSE button
or
press TIME button once, change day by pressing
press STOP button
day starts blinking
OPEN or CLOSE button
to finish
SET AUTOMATIC TIMER
