Wheels and Tires
In areas where the camper is subjected to hot sun for
prolonged periods, shading the tires by covering them
can reduce tire sidewall cracks from forming. Spraying
tire sidewalls with a silicone spray can also help keep
them from drying out. Check the condition of the wheels
regularly. Keep them clean and repaint as necessary to
avoid rust. Check the tightness and condition of lug bolts
regularly.
Brakes and Wheel Bearings
Check brake adjustment and lining regularly, and adjust
as needed per the manufacturer’s instructions. Also
check the wheel bearings regularly and keep lubricated.
If needed, repack with grease and replace the cotter
pins.
Jack Post, Dolly Wheel, and Coupler
Keep threads and moving parts lubricated, and check
their condition regularly. Grease the release lever and
coupler socket to ensure proper operation and fit.
Propane System
The propane system should be checked regularly for
leaks and road damage. Have a qualified propane ser-
vice technician check the entire propane system, includ-
ing regulator pressure, annually, or sooner, if you suspect
a problem, using proper equipment.
Tent Maintenance
Tent Material
To help prevent water damage, it is important to seal all
stitched areas.
1. All vinyl tents need to get wet one or more times to
seal the needle holes. Your tent is sewn with a spe-
cial thread that swells up and seals the holes after
it has been wet.
2. You will need to precondition your tent before camp-
ing by spraying water on the tent until thoroughly
wet.
3. Begin this procedure by setting up the camper as
you would when camping. Be sure all windows are
zipped closed and the storm door window is closed
and secure.
4. Remove all cushions and drapes and store them in
a dry place.
5. Saturate all seams with water and check inside the
camper for any seam leaks. Make sure that any
moisture in the interior resulting from this process is
removed if present.
6. Allow the tent to dry, making sure it is completely
dry before putting it away.
7. If leaking should reoccur after prolonged use, you
may consider resealing the stitching with one of the
recommended tent sealing products on the market
or paraffin. Once the sealing process is completed,
retest for leaks using the steps listed above.
Tent Vinyl Maintenance
All vinyl tents need to be dampened with water, one or
more times, to seal the needle holes. Your tent may leak
the first time it gets wet. This is normal. The tent is sewn
with special thread which expands when wet and helps
to seal the needle holes.
Seal all seams before the first trip, and each year there-
after, to prevent water damage to the interior of your
camper. It’s a good idea to include a wax candle in your
field maintenance kit to seal small leaks which may
develop while you are camping. (If you use a candle for
emergency lighting, be sure to observe proper fire safety
precautions. Have your camper fire extinguisher nearby,
and be sure you and your guests know how to operate
it.)
Your plastic windows have a -20° F cold crack. Do not
crank your tent up to the maximum height in extremely
cold weather (0° F). Doing so could shatter your
windows.
To avoid damage from mold or mildew, allow a wet tent
to dry completely before closing the camper. If you must
close the camper with the tent wet, be sure to protect all
the cushions and drapes from dampness by storing them
in a dry, protected area.
Crank-Up Lift System
To help protect your Limited Warranty, you must perform
general maintenance and regular inspections. Failure to
provide proper service maintenance is easily recognized
as it is reflected in the condition of your camper.
Care And Maintenance
41
Содержание Coachmen Clipper
Страница 52: ......
