Assembly
STEP 1:
Place a wheel (12) between
the legs of a fork (10). Insert
an axle bolt (11) through the
outside (narrower) guide and
through a plain washer (13)
placed between the outside
guide and the wheel. Locate
a second plain washer (13)
between the wheel and the
inside guide then insert
the axle bolt all the way
through. Note that the
outside guide is recessed so
that the bolt head is a flush
fit.
STEP 2:
Insert one end of the axle (14)
into the inner guide and locate
on the axle bolt. Screw in but
do not fully tighten the axle
bolt using an Allen key. Ensure
that the hole in the end of the
axle aligns with the hole in the
underside of the inner guide
then while holding the axle
steady, tighten the bolt.
PLAIN WASHER
PLAIN WASHER
ALIGN HOLES
GRUB SCREW
IMPORTANT:
The barrow is supplied with 6 plain washers
as depending on the fit of the wheel, it may be necessary
to fit 2 washers on one side to space the wheel correctly.
Zero Barrow
5
