Forest Master Model: FM6DD/FM4DDE
8
Assembly
Assembly
1. Lay all the parts out flat in a suitable assembly area and check to make sure all
parts are there.
2. Slide the axle (46) into the square tubing of the base (42) and place a 16mm flat
washer (47) on each end of the axle.
3. Next, place the wheels (43) on each end of the axle (46) and secure with a split
pin (45) through the small holes on the outer of the axle (46).
4. Finally, place each dome cap (48) on the ends of the axle (46) and secure the cap
by tapping it with a mallet or hammer.
Part Name
Part
No.
Qty.
Engine/Motor with Drum
60
1
Base
42
1
Feed Hopper
1
1
Discharge Chute
34
1
Axle
46
1
Wheels
43
2
Split Pin
45
2
16mm Washer
47
2
Dome Cap
48
2
M8x35 Bolts
56
4
Part Name
Part
No.
Qty.
M8 Washers
33
8
M8 Spring Washer
30
4
M8 Nut
57
4
M8x110 Bolt
49
2
M8 Serrated Washer
55
2
M6x23 Bolt
51
1
M6 Washer
41
3
M6 Spring Washer
59
3
M6x12 Bolt
50
2
Assembly Parts
