Forest Master Models: FM9DD/FM14DD/FM18DD
7
Assembly
Part Name
Part
No.
Qty.
Engine with Drum
8
1
Base
1
1
Feed Hopper
21
1
Feed Hopper Tray
22
1
Discharge Chute
36
1
Axle
3
1
Wheels
2
2
Split Pin
43
2
20mm Washer
4
4
Dome Cap
44
2
M10x45 Bolts
48
4
Part Name
Part
No.
Qty.
M10 Washers
47
8
M10 Spring Washer
49
4
M10 Nut
50
4
M8x20 Bolt
55
4
Battery Box
56
1
Battery
57
1
M5x125 Bolt
58
2
M5 Nut
59
2
M8 Flat Washer
45
4
M8 Spring Washer
33
4
M8 Nut
46
4
Assembly Parts
Assembly
Note that the majority of bolts specified are loosely fitted in their correct location for shipping.
1. Lay all the parts out flat in a suitable assembly area and check to make sure all parts are there.
2. Slide the axle (3) into the square tubing of the base (1) and place a 16mm flat washer (4) on each end of
the axle. Note you should only need two washers but four are provided in case the wheels are a bit loose.
3. Next, place the wheels (2) on each end of the axle (3) and secure with a split pin (43) through the small
holes on the outer end of the axle (3). Bend the ends of the slit pins back against the axle to secure.
4. Finally, place each dome cap (44) on the ends of the axle (3) and secure the cap by tapping it with a mallet
or hammer.
1
44
44
2
2
3
4
4
43
43