Forest-Master FM13SG, Руководство пользователя

Страница: 7 / 19

Stump Grinder FM13SG
7
REMOVING STUMPS
• Remove all loose pieces of wood, stones, wire and other debris from the area before
beginning stump removal.
• Wind direction should be considered, as it influences the direction in which dust and
wood chips are directed.
• Never operate the grinder after dark.There will be no adequate light for the operator to
use the grinder safely.
• Always allow a cold engine time to warm up before cutting a stump.
• Only the portion of cutting wheel within the 80 degree area shown below should
engage the stump. Never undercut the stump or use the bottom of the cutting wheel for
cutting purposes.
• Never leave the controls when the cutting wheel is rotating.
Operating Tips!
• Use smooth, comfortable side to side movements while operating.
• When it is desired to cut smaller roots, it may be more effective to do so before rather
than after cutting the stump.
• Should the chip build-up become excessive when cutting, shut off the machine, wait for
the cutting wheel to stop rotating, retract the machine from the stump and rake away the
chips. It is also possible to use the cutter wheel to push chips off to the side.
• In order to prevent any of the wheels becoming stuck in the hole. Move the grinder to
the other side of the stump to continue removal or by filling the hole with chips before
continuing.