6
8
7
3
5
4
K
L
B
Place the prop against the inside of the front batten. Position the
screw so that the prop can be turned both ways and offer two
settings for ventilation. Use a single 40mm screw.
Place the two sections that you have just completed in step 3 against the
front of the green house. Fix each in place doing the following.
Screw through the side panel using 2x60mm screws.
Screw through the bottom batten in to the TWGDR using 2x60mm screws.
screw down through the top batten in to the front TWGDR using 2x70mm
screws
Fix a 347mm strip to the bottom of two of the doors using 2x30mm
screws for each.
B
Fix the cover strips to the front and back of each side panel
making sure that each is flush. Fix these in place using 30mm
screws.
Forest Garden Ltd, Unit 288 Hartlebury
T
rading Estate, Hartlebury
, W
orcestershire DY10 4JB
N
M
O
D
PRE-DRILL
PRE-DRILL
PRE-DRILL
PRE-DRILL
PRE-DRILL
PRE-DRILL
PRE-DRILL
Frame
Fix two hinges to the back of each opening window using 3x25mm
screws for each hinge. Place the windows on top of the frame making
sure that they are square and in line with the side panels and fix the
other half of the hinges to the back panel using another 3x25mm
screws
From Inside
Place the two (fixed windows) on to the green house. These must be in line with the two outer
opening windows. They must each be placed so that there is a small gap between these and
the outside opening windows to allow them to open freely.
Fix these in place screwing up through the front batten, making sure the screws locate into the
windows framing. Use a single 60mm screw for each.
At the back screw down through the windows framing and into the top of the back panels again
using a 60mm screw for each
Fix a 793mm strip to each of the opening windows so that it overlap the other windows. Fix
using 2x25mm screws. Fix the remaining strip so that it overlaps both of the fixed windows.
Board can be
removed for
painting
