1
2
3
4
505
8
X
2
50mm
8
4
70mm
Position the rafter assembly into the slots. Make sure the
post assemblies are 1325mm apart. Secure using 2x50mm
screws through post into rafter as shown.
MUST PRE DRILL
MUST PRE DRILL
MUST PRE DRILL
50mm
50mm
50mm
50mm
MUST PRE DRILL
50mm
50mm
8
NOTE IT IS SOMETIMES EASIER TO ATTACH RAFTER
ASSEMBLY WHILE PRODUCT IS LAY ON THE GROUND
6
70mm
50mm
50mm
Secure the lattice (ELD62) between two
posts (UPARTSU) using 2x50mm
screws through the lattice framing into
the post. Make sure the lattice is
positioned as shown with drainage
holes to the bottom of the assembly.
Repeat on both sides and construct 2.
Position the angled braces (UCBC) So that
they are flat onto the uprights and the long
rafters. Secure using 1x50mm through each
end.
70mm
70mm
70mm
70mm
70mm
70mm
Attach the rafters with
small notches
(UPARTNRSN) to the
large rafters (URCB6)
using 70mm screws
one in the centre and 2
300mm either side.
70mm
70mm
70mm
70mm
Position the large notched rafters
(UPARTNRLN) in the centre of the posts onto
the large rafter and secure using 70mm
screws.
ISSUE 0210
Forest Garden Ltd, Units 291 & 296 Hartlebury Trading Estate, Hartlebury, Worcestershire, Dy10 4JB
50mm
