SIDE BRACE
Assemble each work bench as
shown. Fix each board using
2x45mm screws
for each end.
(Pre- drill)
Fix the lock and
handle as shown
using the fixings
supplied.
(Pre- drill)
Place and fix the hook to the post so that is in
line with the door. Fix the eye to the door at the
desired position. Repeat for the opposite door.
(Pre- drill)
DOOR PANEL
BENCH LEG
FRONT
BRACE
BACK BRACE
LONG BRACE
SHORT
BRACE
955 SLAT
1080 SLAT
830 SLAT
H
I
J
MUST PRE DRILL
This article contains biocidal products to give protection against wood destroying insects & wood rotting fungi. Contents may
vary
.
May contain : Basic copper carbonate (Copper (II) carbonate – Copper (II) hydroxide (1:1), Cupric oxide, Copper hydroxide
carbonate, oxyethyl, ammoniumpropionate, Copper HDO
, Propiconazole, T
ebuconazole, Boric acid, Benzalkonium chloride.
W
ear gloves when handling freshly treated wood. Avoid breathing dust when cutting treated or untreated wood. Dispose of off-
cuts responsibly – do not burn.
Forest Garden Ltd, Unit 288, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
