Forest Garden Ltd, Unit 288 Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
Maintenance.
Regularly check that all fixings are secure.
Regularly check for structural parts for damage.
Regularly check benches are free of splinters.
Fix the remaining rafters to the finial base the same as step 6.
From inside the gazebo fix each rafter to the post by screwing up
through the post, at an angle, into the rafter.
Attention:
Make sure that the rafters are secured by another person to
avoid head injury.
6
7
8
9
10
11
I
L
H
N
M
O
P
Q
R
S
T
U
V
W
X
Fix a rafter to the finial base and make sure that
everything is tight before securing the rafter using a 70mm
screw, screwing at an angle through the rafter in to the
post.
Complete for the opposite side and position the assembly
onto the Gazebo so that the rafters sit into the top of the
posts.
Slide a roof section into place using the grooves on
the rafters. From underneath the roof section fix the
roof to the rafters each side using 2 x 70mm screws
for each side, screwing through the batten first.
Place the metal cap over the finial base
and screw the finial top into place over the
top.
Slot each of the loose roof
boards into the ends of the roof
panels. Secure each board in
place using a 45mm screws for
each end, securing the boards
to the rafters.
Fix each of the bench components to the legs as shown using 2 x 45mm screws
for each end. Use a single screw on each end for the bench support (W).
When placing the bench slats, position the front and back first, making sure
that each is flush on all sides. Again fix these using 2 x 45mm screws for each
end.
When all of the roof
sections have been
secured. Use the silicon
and gun provided to
seal down the side of
each roof.
Attention
Take care when
working at height and
make sure ladders are
anchored
Biocidal Product Regulation (EU 528/2012) Article 58 Information:
This article contains biocidal products to give protection against wood destroying insect and wood rotting Fungai.
This article contains timber treated with Tanalith E 3475, incorporating biocidal products to give p
rotection against wood destroying insects & wood rotting fungi.
Contains:
Copper carbonate, Tebuconazole and Propiconazole.
Wear gloves when handling freshly treated wood. Avoid breathing dust when cutting treated or untreated wood. Dispose of off-cuts responsibly – do not burn.