Forest Garden Ltd, Unit 288 Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
6
Fix a rafter to the finial base and make sure that everything is
tight before securing the rafter using a 70mm screw, screwing
at an angle through the rafter.
Complete for the opposite side and position the assembly onto
the Gazebo so that the rafters sit into the top of the posts.
Fix the remaining rafters and apex rafter to the finial base the same as step 6.
From inside the gazebo, fix each rafter to the post by screwing up through the post,
at an angle, into the rafter.
Attention:
Make sure that the rafters are held by another person whilst fixing to
avoid injury.
underside of the
roof section.
Slide a roof section into place using the grooves on
the rafters. From underneath the roof section fix the
roof to the rafters each side using 2 x 70mm screws
for each side, screwing through the batten first.
7
8
When all of the roof sections
have been secured. Use the
silicon and gun provided to
seal down the side of each
roof.
10
O
N
L
Z
M
X
W
U
V
B5
B13
B6
B3
B10
B9
B12
Place the metal cap over the finial base
and screw the finial top into place over the
top.
9
Slot each of the loose roof boards into the ends of the roof panels.
Secure each board in place using a 45mm screw for each end,
securing the boards to the rafters.
(Make sure the boards are tight before fixing.)
Fix each of the bench components to the legs as shown using 2 x 45mm screws for
each end. Use a single screw on each end of the bench support (W).
When placing the bench slats, position the front and back first, making sure that
each is flush on all sides. Again fix these using 2 x 45mm screws for each end.
11
B1
B2
B6
B4
B7
G
Y
A1
F
Attention
Take care when
working at height and
make sure ladders are
anchored
Maintenance.
Regularly check that all fixings are secure.
Regularly check for structural parts for damage.
Regularly check benches are free of splinters.
Biocidal Product Regulation (EU 528/2012) Article 58 Information:
This article contains biocidal products to give protection against wood destroying insect and wood rotting Fungai.
This article contains timber treated with Tanalith E 3475, incorporating biocidal products to give p
rotection against wood destroying insects & wood rotting fungi.
Contains:
Copper carbonate, Tebuconazole and Propiconazole.
Wear gloves when handling freshly treated wood. Avoid breathing dust when cutting treated or untreated wood. Dispose of off-cuts responsibly – do not burn.
