HD04
Installation View:
1.
Connect HDMI source to HDMI splitter Input A or B input
，
Output 1~4 to monitor.
2.
Output 1 as EDID Master Port. Recommend connect all HDMI equipments first, then
power on, it will auto copy Master Port EDID for HDMI source reference which take around
10 seconds.
3.
Input A
、
B by front button selection.
4.
Input LED flash: no any signal detected.
5.
Press A, B buttons together to activated/disabled auto jump function.
6. Auto Jump function ON: A, B Blue LED flash at same time.
7. Auto Jump function OFF: A, B Blue LED on at same time.
LED Indication:
POWER ON/OFF Green
INPUT A
Blue
INPUT B
Blue
OUTPUT
1
Blue
OUTPUT
2
Blue
OUTPUT
3
Blue
OUTPUT
4
Blue
Remark
：
1. There are some DVD equipments still have +5V signal output under power off status, it will
cause auto jump function abnormal, please disable auto jump and setup by press A, B button to
avoid any abnormal operation.
2. HD02/H04 no memory function, it will back to factory default once power off. (input A , auto
jump function off)
2
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV